📞 +91-9109127404 ✉ ferrumironsales@gmail.com
⏰ Mon–Sat: 10:00 AM – 6:00 PM 📍 Pithampur, Sector 3, Dhar, MP

Quality Assurance

Every wire tested. Every lot certified. IS Standards — Non-negotiable.

IS Standards & Certifications

All products manufactured strictly as per Bureau of Indian Standards — BIS license applications in process

📜

IS 13730 (Part 3)

Enamelled Aluminium Round Winding Wire
Polyester / Polyesterimide insulation
Temperature Class 130 / 155 / 180 / 200
EC Grade Aluminium Conductor

Certificate number will be updated here upon receipt from BIS.

📜

IS 1897

Double Paper Covered (DPC) Aluminium Wire
Round conductor (0.81–3.00 mm)
Rectangular / Strip conductor (custom)
Kraft Paper T60 / T80 / T125 GSM

Certificate number will be updated here upon receipt from BIS.

📜

IS 8130

Aluminium Conductors for Overhead Lines
EC Grade — 99.5%+ purity
Soft annealed and hard drawn
Round wire 0.5 mm – 8.0 mm

Certificate number will be updated here upon receipt from BIS.

✅ Gumasta License — Lifetime Validity
✅ Company Incorporation — CIN U28110MP2020PTC054041

Note: BIS certification applications are currently in process for IS 13730 (Part 3), IS 1897 and IS 8130. All products are manufactured strictly as per IS standards with internal quality checks at every stage. Certification numbers will be updated here upon receipt. Existing buyers receive test reports with every consignment.

Quality Control Process

7-stage process — from incoming raw material to final dispatch

1
Incoming QC
EC Grade rod purity check | Diameter ±0.5% | Lot number assigned
2
Rod Breakdown
9.5 mm rod → 1.2–4 mm | Diameter check after each pass | Surface inspection
3
Fine Drawing
Target diameter ±1% | Tensile strength check | No surface defects
4
Annealing
300–350°C nitrogen atmosphere | Elongation ≥15% | Stress relief verified
5
Enamelling / DPC
4–8 enamel coats | Paper GSM verified | Dielectric spot test inline
6
Spooling
Weight per bobbin ±2% | Visual inspection | Lot tag attached
7
Final QC & Dispatch
Full IS test report | Packing list | E-way bill above ₹50,000

Quality Control Lab Equipment

In-house testing instruments for IS 13730 and IS 1897 compliance

EquipmentPurposeStandard
Digital Micrometer (0.001 mm)Conductor diameter check ±1%IS 13730
Resistance Bridge (Kelvin 4-wire)Electrical resistance at 20°CIS 13730
High Voltage Tester (2–5 kV)Dielectric breakdown voltageIS 13730
Tensile Testing MachineElongation at 50 mm/minIS 13730
Annealing OvenHeat shock test at 175°C, 30 minIS 13730
ViscometerEnamel viscosity 80–120 cPIS 13730
Weighing Balance (0.01 g)Weight per metre verificationIS 1897
Paper GSM TesterKraft paper grade verificationIS 1897
Aluminium DPC wire end cross-section quality inspection at Ferrum Iron showing paper layers
Wire cross-section end view quality check at Ferrum Iron showing conductor and insulation

Product Quality Closeups

DPC wire Kraft paper covering texture closeup showing helical wrapping at Ferrum Iron

Kraft Paper Covering Texture — IS 1897

DPC strip rectangular conductor cross-section end-on macro at Ferrum Iron showing paper layers

Strip Cross-Section — Rectangular DPC

Aluminium SE wire close-up showing enamel shine quality at Ferrum Iron Pithampur

SE Wire Enamel Quality — IS 13730

Test Certificate with Every Consignment

Our Quality Commitment to Every Buyer

  • ✅ Test Certificate — Diameter, Resistance, Elongation, Breakdown Voltage
  • ✅ Heat Shock Test Report (IS 13730) — 175°C, 30 minutes
  • ✅ Lot Number for full production traceability
  • ✅ Packing List with exact weight per bobbin / drum
  • ✅ Raw material traceability to EC Grade Hindalco / NALCO ingot
  • ✅ E-Way Bill generated for all orders above ₹50,000
Request Sample & Test Certificate 💬 WhatsApp for Sample